Sliding Doors

SAPA 2160

Lift-and-Slide Door S

High insulated lift-and-slide door with a sleek design

Characteristics

Lift-and-Slide Door 2160 S is made of insulated aluminum profiles with a frame depth of 160 mm and a door leaf  depth of 70 mm. The insulation consists of 40 mm wide glass fibre reinforced polyamide strips. The lift-and-slide door has lift-slide fittings for user-friendly handling. The door leaf is easily slid aside and seals all around as the door leaf is lowered a few millimeters in closed position.

Documentation
2160-2160S-2160S XS-EN
SAPA 2160S

Product benefits

LARGE SIZES

  • Door leaf dimensions. Max recommended width 2,8 m (up to 3,1 m possible in wind sheltered areas). Max recommended height 2,5 m (up to 2,8 m possible in wind sheltered areas). Recommendations are done considering normal wind load.

LARGE SIZES

  • Door leaf weight. Max 250 kg
  • Glass rebate. 23-53 mm

DIVERSITY OF APPLICATIONS

  • Lockable fittings. Inside or in- and outside.
  • Monorail, duo-rail or triple-rail lift-sliding door with several possible combinations

HIGH PERFORMANCE

  • Air tightness. Class 4 according to EN 12207 (600 Pa)
  • Water resistance. Class E900 according to EN 12208 (900 Pa)
  • Wind load resistance. Class C3 according to EN12210 (1200 Pa)

More information

Specifications & EPD

Fitting functions

Lift sliding door 2160 S can be performed as one fixed and one sliding door leaf, alternatively with two sliding door leaf. For opening the handle is turned 180° downwards, whereby the door is lifted a few millimeters and can easily be slid aside. When closing the door leaf goes down again and the rubber sealing tightens all around. The door leafs run silently on nylon rollers on a stainless rail and can be parked (lowered) at any position.

Each sliding door leaf is equipped with  espagnolette with four anchor points. Handles of aluminium and cylinder locks can be mounted on the inside and outside or inside only.

Handle

Lift handle, inside     


Lift handle, inside
Pull handle, outside
 
Lift handle  for cylinder lock, inside     


Lift handle for cylinder lock,
inside and outside

Lift handle for cylinder lock, inside
Oull handle, outside     

Wheels

Location in the wall

For the entire structure to meet the energy saving requirements and ensure good comfort it is necessary to install the sliding terrace door in the warm part of the wall. This means that it should be installed as deep into the wall as possible, which has a number of advantages.

It creates good conditions for appropriate fixing and a well functioning joint. The risk of condensation is reduced due to a higher surface temperature. The joint between the frame profile and the wall shall be made with two step sealing. This means that it should consist of an outer rain barrier with an underlying air channel, a mineral wool insulation layer and an inner diffusion sealing joint.

Glazing

Unprotected glazed surfaces which are so located that they can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.


Glass thickness 23-53 mm



The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.

Elevations And Details

A2160-1005 1234567
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1006 1234678
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1008 123457
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1007 1234567
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1009 1234567
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1010 1234579
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1012 1234678
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1011 1234678
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1013 1234577
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1014 1234577
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1015 12346778
Save this elevation as: dwg / dxf
Click on number to view the details
A2160-1016 12346778
Save this elevation as: dwg / dxf
Click on number to view the details

Technical information

U values for lift-sliding door

Formula for calculating the total U value of a sliding door, taking into account the glazing unit, the share of profiles and an edge zone effect linear factor.

Usliding door = ( Ag * Ug + Af * Uf + Ig * ψg )  /  ( Ag + Af )

The calculations are based on the requirements and general guidelines.

Fixing Principles

Fixing principles

Lift-sliding doors must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the door.

Example:

Fixing of frame with twist anchor inwards     


Fixing of frame with twist anchor outwards

 

Projects using sliding doors SAPA 2160

VillAma, Turku

Finland

Facility and place: VillAma in Turku, Finland
Construction year: 2012
Architect: SAFA Pekka Mäki, Arkitektbyrå Sigge Oy
Fabricator: Alavus Alufront Oy

Facades: Sapa 4150
Doors: Sapa 2074
Windows: Sapa 1074
Lift- and Slide doors: Sapa 2160
Surface finish: Powder coating, RAL 7021

Photography: Vesa Loikas Photography